Browsing by Title
Now showing items 10133-10152 of 48216
-
F-box proteins in cancer stemness: An emerging prognostic and therapeutic target
( Elsevier , 2021 , Article)Cancer is a complex heterogenic disease with significant therapeutic challenges. The presence of cancer stem cells (CSCs) in cancer tissue orchestrates tumor growth, progression, and metastasis, the tumor heterogeneity, ... -
Fabrication & Characterization of 3D Electrospun Biodegradable Nanofibers for Wound Dressing, Drug Delivery and Other Tissue Engineering Applications
( Bentham Science , 2016 , Article)Background: The use of electrospinning technology (ET) in fabrication of threedimensional biodegradable electrospun nanofibers scaffolds (BENS) has recently gained considerable attention in tissue engineering. BENS are ... -
Fabrication and applications of nickel selenide
( Academic Press Inc. , 2019 , Article)This article presents synthetic strategies of different phases and morphologies of nickel selenide in terms of solid state reactions, solvothermal and hydrothermal processes, electrodeposition, precipitation reactions, ... -
Fabrication and characterization of flexible ruthenium oxide-loaded polyaniline/poly(vinyl alcohol) nanofibers
( Wiley , 2020 , Article)© 2020 Wiley Periodicals, Inc. Polyaniline/poly(vinyl alcohol)/ruthenium oxide (RuO2) composite nanofibers were produced by electrospinning technique. Hydrous ruthenium chloride was used as a precursor at different ... -
Fabrication and characterization of poly(vinyl alcohol)-Glycerol-Spinel ferrites flexible membranes
( John Wiley and Sons Inc. , 2019 , Article)Polymer membranes of ferrites nanoparticles, glycerol, and poly(vinyl alcohol) (PVA) were fabricated using a solution casting method. Spinel ferrites nanoparticles, CuFe2O4 or ZnFe2O4, and glycerol were used as dopants to ... -
Fabrication and characterization of pyridinium functionalized anion exchange membranes for acid recovery
( Elsevier B.V. , 2019 , Article)In the present work, the fabrication of pyridinium functionalized anion exchange membranes (AEMs) for acid recovery using diffusion dialysis (DD) processes was developed using brominated poly (2,6-dimethyl-1,4-phenylene ... -
Fabrication and characterization of size-selected Cu nanoclusters using a magnetron sputtering source
( Elsevier B.V. , 2018 , Article)Copper nanoclusters are used widely in applications such as glucose and gas sensors. A physical method is used to produce copper nanoclusters utilizing an ultra-high vacuum (UHV) system. Using a quadrupole mass filter ... -
Fabrication and characterization of the organic rectifying junctions by electrolysis
( Springer Verlag , 2017 , Article)Unlike the conventional solution processable deposition techniques, in this study, we propose a novel and economical method for the fabrication of organic rectifying junctions. The solutions of the orange dye, copper ... -
Fabrication and evaluation of anti-cancer efficacy of lactoferrin-coated maghemite and magnetite nanoparticles
( Taylor and Francis Ltd. , 2019 , Article)Studies on the anti-cancer effects of nanomaterials are a very important step in the clinical practice and treatment of cancerous tissues. Since IONPs have a high potential for cancer treatment, their anti-cancer properties ... -
Fabrication and In Vitro Characterization of a Tissue Engineered PCL-PLLA Heart Valve.
( Nature Publishing Group , 2018 , Article)Heart valve diseases are among the leading causes of cardiac failure around the globe. Nearly 90,000 heart valve replacements occur in the USA annually. Currently, available options for heart valve replacement include ... -
Fabrication and Investigation of Graphite-Flake-Composite-Based Non-Invasive Flex Multi-Functional Force, Acceleration, and Thermal Sensor
( MDPI , 2023 , Article)This work examines the physics of a non-invasive multi-functional elastic thin-film graphite flake–isoprene sulfone composite sensor. The strain design and electrical characterization of the stretching force, acceleration, ... -
Fabrication and investigation of the scratch and indentation behaviour of new generation Ni-P-nano-NiTi composite coating for oil and gas pipelines
( Elsevier Ltd , 2019 , Article)Oil and gas pipelines operate under severe mechanical and chemical conditions, which could lead to catastrophic failure. Electroless nickel-phosphorous (Ni-P) coatings are an excellent candidate for protection against wear ... -
Fabrication and testing of polymeric membranes for energy-efficient separation of Carbon Dioxide from flue gas
( Qatar University Press , 2020 , Poster)One of the major problems the world is facing nowadays is Global Warming. The main ten Green House Gases (GHGs) includes water vapor (H2O), carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O). The most abundant ... -
Fabrication of a nickel sulfide/nickel oxide heterostructure for efficient electrochemical oxidation of methanol
( Royal Society of Chemistry , 2023 , Article)As low-cost anode catalysts for the electrocatalytic oxidation of methanol, a nickel sulfide/nickel oxide (NiS/NiO) heterostructure deposited on Ni foam and its counterparts nickel sulfide (NiS) and nickel oxide (NiO) are ... -
Fabrication of flexible conductive films by rubbing in technology for application in elastic thermo-electric cells
( Elsevier B.V. , 2019 , Article)This method solves the problem of fabrication of flexible elastic conductive thin film samples for thermoelectric applications. For this purpose, rubbing in technology at room temperature condition has been used which is ... -
Fabrication of flexible electrically conductive polymer based micro-patterns using plasma discharge
( Qatar University Press , 2020 , Poster)The application of polymer based micro-patterns in the field of flexible micro-electronics has become the focus as to replace rigid and planar silicon based integrated circuits with weak bendability. Polyethylene terephthalate ... -
Fabrication of flexible electrically conductive polymer-based micropatterns using plasma discharge
( Elsevier B.V. , 2020 , Article)In this work, laboratory prepared PANI and it's composite with carbon nanotubes (PANI/CNTs) were used for the fabrication of micropatterns on flexible polyethylene terephthalate (PET) substrate using the drop cast method ... -
Fabrication of fouling resistant Ti3C2Tx (MXene)/cellulose acetate nanocomposite membrane for forward osmosis application
( Elsevier Ltd , 2020 , Article)In this study, Ti3C2Tx (MXene) was used to enhance the fouling resistance of FO flat-thin film membranes. Mixed-matrix Ti3C2Tx (MXene)/ cellulose acetate (CA) membranes with different (wt%) loading of MXene were fabricated ... -
Fabrication of Fouling Resistant Ti3C2Tx(MXene) Cellulose Acetate Nanocomposite Membrane for Forward Osmosis Application
(2020 , Master Thesis)Forward Osmosis (FO) is one of the promising technologies that can be used to combat growing water scarcity. However, FO membrane fouling hinders the widespread application of this technology by significantly reducing the ... -
Fabrication of H2S gas sensors using ZnxCu1-xFe2O4 nanoparticles
( Springer , 2020 , Article)Spinel ferrite nanoparticles can be easily retrieved and utilized for multiple cycles due to their magnetic properties. In this work, nanoparticles of a ZnxCu1-xFe2O4 composition were synthesized by employing a sol–gel ...
