Search
Now showing items 21-30 of 49
Cryogenic temperature and strain rate dependence of mechanical properties for extruded AA6060 alloys
(
Trans Tech Publications Ltd
, 2014 , Article)
Tensile properties and fracture behavior of an AA6060 alloy were investigated at room temperature (295K) and cryogenic temperature (77K). It was found that both ultimate tensile strength and elongation increased with ...
Thermal properties measurement and heat storage analysis of paraffin/graphite composite phase change material
(
Elsevier Ltd
, 2014 , Article)
This study aims at the preparation of a paraffin/graphite waste composite for thermal energy storage application at low temperature. In this composite material, the paraffin is characterized by high phase change latent ...
Electrodeposition of nanocrystalline Ni-Mo alloys from alkaline glycinate solutions
(
Electrochemical Science Group
, 2014 , Article)
The induced electrodeposition of nanocrystalline Ni-Mo alloys was investigated using two different molar ratios of Ni:Mo in sodium glycinate solution at pH 9.3. The chemical nature of the Ni2+ and MoO4 2- in alkaline ...
Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials
(
Elsevier Ltd
, 2014 , Article)
Thermal and mechanical properties of blends based on high density polyethylene and paraffin wax were investigated. The blends were prepared from 5 to 50vol. % of paraffin wax employing a twin-screw extruder. Thermal behaviour ...
Dispersion of soft Bi particles and grain refinement of matrix in an Al-Bi alloy by equal channel angular pressing
(
Elsevier BV
, 2014 , Article)
The deformation behavior of a soft particle containing Al-8Bi hypermonotectic alloy during equal-channel angular pressing was studied. The size, shape and distribution of soft Bi particles are substantially modified via ...
Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax
(
Elsevier Ltd
, 2014 , Article)
A modified in situ polymerization microencapsulation procedure for the preparation of microcapsules with paraffin wax cores (43 wt.%) and melamine–formaldehyde resin shells having a uniform size distribution and a spherical ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...
The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete
(
OMICS International
, 2014 , Article)
It is the objective of this project is to investigate the mechanical and chemical behaviour of new concrete type obtained by adding aluminium dross which is an impure aluminium mixture that results from metals melting and ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Deep drawability and deformation behavior of AZ31 magnesium alloy sheets at 473K
(
Elsevier B.V.
, 2014 , Article)
Deep drawing experiments carried out at 473. K revealed that the AZ31 magnesium alloy sheets could be successfully drawn at a limiting drawing ratio (LDR) of 2.3 with a drawn depth of 54. mm. Microstructural and textural ...