Search
Now showing items 21-30 of 33
Dispersion of soft Bi particles and grain refinement of matrix in an Al-Bi alloy by equal channel angular pressing
(
Elsevier BV
, 2014 , Article)
The deformation behavior of a soft particle containing Al-8Bi hypermonotectic alloy during equal-channel angular pressing was studied. The size, shape and distribution of soft Bi particles are substantially modified via ...
Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax
(
Elsevier Ltd
, 2014 , Article)
A modified in situ polymerization microencapsulation procedure for the preparation of microcapsules with paraffin wax cores (43 wt.%) and melamine–formaldehyde resin shells having a uniform size distribution and a spherical ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...
The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete
(
OMICS International
, 2014 , Article)
It is the objective of this project is to investigate the mechanical and chemical behaviour of new concrete type obtained by adding aluminium dross which is an impure aluminium mixture that results from metals melting and ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Deep drawability and deformation behavior of AZ31 magnesium alloy sheets at 473K
(
Elsevier B.V.
, 2014 , Article)
Deep drawing experiments carried out at 473. K revealed that the AZ31 magnesium alloy sheets could be successfully drawn at a limiting drawing ratio (LDR) of 2.3 with a drawn depth of 54. mm. Microstructural and textural ...
Nanoscale-controlled architecture for the development of ultrasensitive lectin biosensors applicable in glycomics
(
Royal Society of Chemistry
, 2014 , Article)
In this mini-review the most advanced patterning protocols and transducing schemes for the development of ultrasensitive label-free and label-based lectin biosensors for the glycoprofiling of disease markers and some ...
Improved mechanical and corrosion properties of nickel composite coatings by incorporation of layered silicates
(
Elsevier B.V.
, 2014 , Article)
Layered silicates as exfoliated montmorillonite are incorporated into nickel films by electrodeposition, enhancing both corrosion resistance and hardness. Films were deposited onto stainless steel from a plating solution ...
Salt water corrosion resistance of electrodeposited Ni-layered silicate nanocomposite coatings from Watts' type solution
(
Elsevier B.V.
, 2014 , Article)
Pure nickel and nickel-montmorillonite (Ni-MMT) composite coatings were produced using pulse current electrodeposition from Watts' type solution. Experimental results show that the codeposition of MMT particles into the ...
Viscoelastic and photo-actuation studies of composites based on polystyrene-grafted carbon nanotubes and styrene-b-isoprene-b-styrene block copolymer
(
Elsevier Ltd.
, 2014 , Article)
Photoactuating composites based on the linear triblock copolymer polystyrene-b-polyisoprene-b-polystyrene (SIS) were prepared by incorporation of polystyrene-modified multiwalled carbon nanotubes (MWCNT-PS). Modification ...