Search
Now showing items 21-30 of 31
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
(
Elsevier Ltd
, 2018 , Article)
In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...
Biomechanical design of a composite femoral prosthesis to investigate the effects of stiffness, coating length, and interference press fit
(
Elsevier Ltd
, 2018 , Article)
Traditionally, high stiffness hip prostheses are associated with aseptic loosening. Hence, the effects of stiffness, coating length, and interference press fit on load sharing and micro-movements are investigated for a ...
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
(
Elsevier Ltd
, 2018 , Article)
The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
(
Elsevier
, 2019 , Article)
A fiber laser welding-brazing procedure has been developed for joining AZ31B magnesium alloy to Cu-Ni coated Ti-6Al-4V titanium sheet using AZ92D filler wire. The effect of the interlayer arrangements (AZ31B/Ni-Cu/Ti-6Al-4V ...
Parametric study of radial functionally graded femoral prostheses with different geometries
(
Kluwer Academic Publishers
, 2015 , Article)
Due to complex loading and chemical conditions of the human body, the artificial replacements of the body organs demand materials with superior characteristics. Therefore, recently using composite materials have gained a ...
Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces
(2013 , Article)
This paper describes a computationally aided design process of a thin wall structure subject to dynamic compression in both axial and oblique directions. Several different cross sectional shapes of thin walled structures ...
Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental - Statistical approach by using Response Surface Methodology
(
Elsevier
, 2017 , Article)
Combined experimental-statistical approach for effective thermal conductivity and relative viscosity determination were investigated in this present study. Nanofluid used was dispersion of novel nanomaterial Cellulose ...
Thermophysical properties measurement of nano cellulose in ethylene glycol/water
(
Elsevier
, 2017 , Article)
Nanofluids are the suspensions of solid nanoparticles in the liquids as base fluids. They have been the latest engineering material among the investigators as they exhibit promising enhanced thermal properties and many ...
Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact
(
Elsevier Ltd
, 2018 , Article)
In the current decade, the development of recyclable, renewable, and sustainable products to replace fossil products is an essential and important matter for industrial and environmental purposes. In the present study ...
Collapse behavior of thin-walled corrugated tapered tubes
(
Elsevier Ltd
, 2017 , Article)
Thin-walled structures have been widely used in energy absorption and safety applications such as automotive, due to their lightweight and progressive folding modes. This work studies the collapse behavior and energy ...