Search
Now showing items 1-6 of 6
Comparison of the effect of carbon, halloysite and titania nanotubes on the mechanical and thermal properties of LDPE based nanocomposite films
(
Chemical Industry Press
, 2018 , Article)
In this study, titania nanotubes (TNTs) were prepared by hydrothermal method with the aim to compare the properties of these one-dimensional tubular nanostructures' reinforced nanocomposites with the carbon and halloysite ...
High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb
(
Elsevier Ltd
, 2018 , Article)
Nanocrystalline metals—with grain sizes less than 100 nm— have strengths exceeding those of coarse-grained and even alloyed metals [1], [2]. A bulk nanocrystalline Cu-1%Nb alloy was synthesized by an in-situ consolidation ...
Synthesis and properties of HA/ZnO/CNT nanocomposite
(
Elsevier Ltd
, 2018 , Article)
The goal of this study was to examine the tribomechanical properties of hydroxyapatite (HA)/ZnO and HA/ZnO/CNT composite ceramics (carbon nanotubes; with different ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%). The composites were ...
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
(
Elsevier Ltd
, 2018 , Article)
In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
(
Elsevier Ltd
, 2018 , Article)
The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
(
Elsevier Ltd
, 2018 , Article)
Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...