تصفح Mechanical & Industrial Engineering حسب العنوان
السجلات المعروضة 395 -- 414 من 1210
-
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
( Elsevier Ltd , 2018 , Article)Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ... -
Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
( Elsevier Ltd , 2020 , Article)This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ... -
Effect of interfacial friction and fold penetration on the progressive collapse of foam-filled frustum using kinematically admissible model
( Taylor and Francis Ltd. , 2018 , Article)In this article, we extend our earlier analytical efforts of the progressive collapse of foam-filled conical frustum with the aid of a kinematically admissible folding mechanism. The instantaneous crushing force as well ... -
Effect of Interlayer Thickness on Joint Formation Between Ti-6Al-4V and Mg-AZ31 Alloys
( Springer New York LLC , 2014 , Article)The joining of a Ti-6Al-4V alloy to a Mg-AZ31 alloy was performed using Ni electroplated coatings during the TLP bonding process. In this work, different coating thicknesses were used ranging from 1 to 20 μm. The effect ... -
Effect of microstructural evolution on wettability and tribological behavior of TiO2 nanotubular arrays coated on Ti–6Al–4V
( Elsevier Ltd. , 2015 , Article)Self-organized TiO2 nanotubular arrays were fabricated by electrochemical anodization of Ti–6Al–4V plates in an NH4F/H3PO4 electrolyte. The effect of microstructural evolutions on the wettability and tribological behavior ... -
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
( Elsevier Ltd , 2018 , Article)The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ... -
Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites
( Elsevier Ltd , 2017 , Article)In this study, multi-pass friction stir processing using zirconia nanoparticles was performed on AA5083 sheets to fabricate surface nanocomposites. Effect of using different number of passes on the microstructure, ... -
Effect of nanostructured polyhedral oligomeric silsesquioxane on the physical properties of poly(vinyl alcohol)
( John Wiley and Sons Inc. , 2017 , Article)An effective amphiphilic polyhedral oligomeric silsesquioxane (POSS) encapsulated poly(vinyl alcohol) (PVA) nanocomposite was successfully fabricated by solution blending method. Anionic octa(tetramethylammonium) (Octa-TMA) ... -
Effect of Ni incorporation in cobalt oxide lattice on carbon formation during ethanol decomposition reaction
( Elsevier B.V. , 2019 , Article)In this work, we report the results of catalytic decomposition of ethanol over a porous mixed metal oxide of Ni-Co (NiCoO2) and analyze the effect of Ni incorporation in Co3O4 lattice on the activity and hydrogen selectivity ... -
Effect of phosphorus on controlling and enhancing electrocatalytic performance of Ni–P–TiO2–MnO2 coatings
( Elsevier B.V. , 2018 , Article)Electroless Ni–P coatings have received profound interests in recent years for electrocatalytic Hydrogen Evolution Reaction (HER). Their performance can be significantly enhanced by incorporating metal oxides and tuning ... -
Effect of poly ethylene glycol (PEG) on structural, thermal and photoluminescence properties of CdO nanoparticles for optoelectronic applications
( Elsevier Ltd , 2019 , Conference Paper)Current study deals with capped/uncapped Cadmium Oxide Nanoparticles (CdO NPs) synthesized by chemical precipitation technique. Structural, morphological, thermal and optical properties of these samples were investigated ... -
Effect of reflective surface on the impulse response of the secondary path of an active noise control system
( International Institute of Acoustics and Vibration, IIAV , 2018 , Conference Paper)Previous research has shown that a reflective surface has an impact on the control performance of an active noise control system. System identification of the secondary path is of utmost importance in the effectiveness of ... -
Effect of swirl at intake manifold on engine performance using ethanol fuel blend
( Taylor and Francis Inc. , 2020 , Article)Ethanol fuel is widely used as an alternative fuel in spark ignition engines. The use of ethanol reduces dependence on fuel from the fraction of hydrocarbons. As such, adding swirl generators to the intake manifold aims ... -
Effect of synthesis conditions on ZnO thin film photosensitivity via mSILAR technique
( Institute of Electrical and Electronics Engineers Inc. , 2017 , Conference Paper)Zinc oxide (ZnO) nano-polycrystalline thin film has been synthesized by microwave-assisted successive ionic layer adsorption and reaction (mSILAR) technique. The prepared samples were annealed in air and an inert atmosphere. ... -
Effect of temperature and erosion on pitting corrosion of X100 steel in aqueous silica slurries containing bicarbonate and chloride content
( Elsevier Ltd , 2014 , Article)The effect of temperature on erosion-enhance pitting corrosion behavior of X100 steel has been investigated. Tests were performed at two temperatures with the help of open circuit potential (OCP), potentiodynamic polarization ... -
Effect of temperature and radial displacement cycles on soil?concrete interface properties using modified thermal borehole shear test
( American Society of Civil Engineers (ASCE) , 2018 , Article)Thermoactive geostructures (such as energy piles) are used for heating and cooling of buildings, which generate daily temperature changes and cycles in the geostructure and surrounding soil due to the intermittent operation ... -
Effect of the modified hybrid particle on the corrosion inhibition performance of polyolefin based coatings for carbon steel
( Elsevier B.V. , 2022 , Article)This work reports the corrosion inhibition performance of modified hybrid particles reinforced into polyolefin matrix. The cerium oxide coated zinc oxide hybrid particles (CeO2@ZnO) were synthesized via a chemical precipitation ... -
Effect of Utilizing a Novel Intake Manifold Design on Smoke Emissions and Particulate Size Distributions of a Gas-to-Liquid Diesel Engine
( American Society of Mechanical Engineers (ASME) , 2021 , Article)Smoke emissions and particulate matter (PM) size distributions were investigated on a direct-injection (DI) single-cylinder diesel engine running on both gas-to-liquid (GTL) and diesel fuels utilizing a novel spiral-helical ... -
Effect of water absorption on the mechanical properties of long date palm leaf fiber reinforced epoxy composites
( American Scientific Publishers , 2015 , Article)This paper examines the effect of the first 24 hours water absorption on the mechanical properties and morphology of the long date palm leave fiber (DPLF) and unidirectional reinforced epoxy composites. The mechanical ... -
Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications
( Elsevier , 2022 , Article)Zirconium has attracted considerable attention in the biomedical field owing to its biocompatibility and desirable tribological and mechanical properties. In this study, we anodized pure zirconium in an ammonium fluoride ...