تصفح Center for Advanced Materials Research حسب تاريخ النشر
السجلات المعروضة 21 -- 40 من 1253
-
Qatalum's 1st Cut Spl; Treatment And Applications
( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Spent Pot Lining (SPL) is produced in thousands of tons annually as a waste from the aluminum industry. SPL is classified into two types, 1st and 2nd Cut SPL. The 1st cut, which is the material under investigation in this ... -
New Processing Technique To Improve Physical And Mechanical Properties Of Graphene Nanocomposites
( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Nanocomposites are commonly used in many applications and new processing techniques are required to improve mechanical and physical properties of these materials. Graphene nanoplatelets (GNPs) have high aspect ratio and ... -
Anti-microbial Activity Of Graphene Oxide Against Bacteria And Fungi
( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Graphene Oxide (GO) is a promising material for various applications. The team prepared GO from graphite and studied the interaction with different microorganisms. Anti-microbial properties were detected for the prepared ... -
Biocompatible Graphene Oxide With Anchored Zwitterionic Moiety - Synthesis, Characterization And Application
( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Biocompatible Graphene Oxide with Anchored Zwitterionic Moiety - Synthesis, Characterization and Application Markéta Ilčíková1, Zuzana Kroneková2, Anna Záhoranová2 and Peter Kasák1* 1 Center for Advanced Materials, Qatar ... -
Mechanism of GaAs surface sulfidation
( Electrochemical Science Group , 2014 , Article)The mechanism of GaAs sulfidation under illumination and potentiodynamic polarization was investigated in acidified thiourea (TU) electrolytes. Sulfidation generated smooth surfaces, as revealed by scanning electron ... -
Surface modification of low-density polyethylene with poly(2-ethyl-2- oxazoline) using a low-pressure plasma treatment
( Elsevier Ltd , 2014 , Article)Low-density polyethylene (LDPE) is a suitable polymer for biomedical applications due to its good physiochemical properties, but its insufficient biocompatibility is often an issue. Therefore, biocompatible substances such ... -
Viscoelastic and photo-actuation studies of composites based on polystyrene-grafted carbon nanotubes and styrene-b-isoprene-b-styrene block copolymer
( Elsevier Ltd. , 2014 , Article)Photoactuating composites based on the linear triblock copolymer polystyrene-b-polyisoprene-b-polystyrene (SIS) were prepared by incorporation of polystyrene-modified multiwalled carbon nanotubes (MWCNT-PS). Modification ... -
Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing
( Elsevier B.V. , 2014 , Article)Novel deformation structures of commercial pure (CP) Ti induced by equal channel angular pressing (ECAP) at room temperature have been studied by electron backscattering diffraction (EBSD). All the deformation twins occurring ... -
Electrodeposition of nanostructured Nickel-Ceramic composite coatings: A review
( Electrochemical Science Group , 2014 , Article)This review presents a recent literature on electrochemically prepared nickel-ceramic nanocomposites coatings. These nanostructured coatings exhibit remarkable enhanced corrosion resistance and microhardness which are of ... -
Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state
( Elsevier Ltd , 2014 , Article)This work focuses on the study of heat transfer mechanisms in composites materials which may be used for Latent Heat Thermal Energy Storage applications. These composites contain phase change material (PCM) which can absorb ... -
Achieve high ductility and strength in an Al-Mg alloy by severe plastic deformation combined with inter-pass annealing
( Elsevier B.V. , 2014 , Article)Metallic materials processed by severe plastic deformation generally possess very high strength but a rather low uniform elongation, usually <5%. In the present Al-7Mg alloy processed by room temperature equal channel ... -
The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete
( OMICS International , 2014 , Article)It is the objective of this project is to investigate the mechanical and chemical behaviour of new concrete type obtained by adding aluminium dross which is an impure aluminium mixture that results from metals melting and ... -
Salt water corrosion resistance of electrodeposited Ni-layered silicate nanocomposite coatings from Watts' type solution
( Elsevier B.V. , 2014 , Article)Pure nickel and nickel-montmorillonite (Ni-MMT) composite coatings were produced using pulse current electrodeposition from Watts' type solution. Experimental results show that the codeposition of MMT particles into the ... -
Synthesis and electrochemical properties of nickel oxide/carbon nanofiber composites
( Elsevier Ltd , 2014 , Article)The electrospinning of polyacrylonitrile (PAN) with a polyaniline and graphene sol–gel mixture produced uniform, smooth fibers with an average diameter of 0.3 μm. These electrospun fibers were stabilized for 2 h at 200 °C ... -
Improved mechanical and corrosion properties of nickel composite coatings by incorporation of layered silicates
( Elsevier B.V. , 2014 , Article)Layered silicates as exfoliated montmorillonite are incorporated into nickel films by electrodeposition, enhancing both corrosion resistance and hardness. Films were deposited onto stainless steel from a plating solution ... -
Processing, characterization and modeling of recycled polypropylene/glass fibre/wood flour composites
( Elsevier Ltd , 2014 , Article)Polypropylene (PP) is one of the most common thermoplastic materials in the world. There is a need to recycle the large amount of this used material. To overcome the environmental problems, related to the polymer waste, ... -
Evaluation Techniques for the Corrosion Resistance of Self-Healing Coatings
( ESG , 2014 , Article)Self-healing coatings, materials that autonomically repair damage, are a method of extending the life of corrosion prevention coatings. The different types of self-healing coatings are briefly outlined. A review of the ... -
Cryogenic temperature and strain rate dependence of mechanical properties for extruded AA6060 alloys
( Trans Tech Publications Ltd , 2014 , Article)Tensile properties and fracture behavior of an AA6060 alloy were investigated at room temperature (295K) and cryogenic temperature (77K). It was found that both ultimate tensile strength and elongation increased with ... -
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
( Elsevier, Ltd , 2014 , Article)Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ... -
Deep drawability and deformation behavior of AZ31 magnesium alloy sheets at 473K
( Elsevier B.V. , 2014 , Article)Deep drawing experiments carried out at 473. K revealed that the AZ31 magnesium alloy sheets could be successfully drawn at a limiting drawing ratio (LDR) of 2.3 with a drawn depth of 54. mm. Microstructural and textural ...