Search
Now showing items 1-10 of 10
Modification of polyethylene by RF plasma in different/mixture gases
(
MDPI AG
, 2019 , Article)
Herein, low-density polyethylene (LDPE) films were treated using radio-frequency plasma discharge in the presence of air, nitrogen, oxygen, argon, and their mixtures to introduce new chemical functionalities. The surface ...
2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers with enhanced mechanical and electrical properties
(
Public Library of Science
, 2017 , Article)
Novel 2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers have been successfully fabricated by an electrospinning technique. The high aspect ratio, hydrophilic surfaces, and metallic conductivity of delaminated ...
Enhancement of adhesion characteristics of low-density polyethylene using atmospheric plasma initiated-grafting of polyethylene glycol
(
MDPI AG
, 2021 , Article)
The low-density polyethylene/aluminum (LDPE/Al) joint in Tetra Pak provides stability and strength to food packaging, ensures protection against outside moisture, and maintains the nutritional values and flavors of food ...
Separation of water/oil emulsions by an electrospun copolyamide mat covered with a 2D Ti3C2Tx MXene
(
MDPI AG
, 2020 , Article)
Purpose: Copolyamide 6,10 (coPA) electrospun mats were covered with multilayered (ML) and single-layered (SL) MXene (Ti3C2Tx) as a membrane for the separation of water/vegetable oil emulsions. Methods: Prepared membranes ...
Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior
(
MDPI AG
, 2020 , Article)
Composites of high-density polyethylene (HDPE) and expanded graphite (EG) are prepared for heat exchangers in multi-effect distillation (MED) desalination. At 50 wt.% EG loading, the thermal conductivity of HDPE was increased ...
An Enhancement of Compositional Stability of Phase Change Materials by Lamination with Aluminum Sheet
(
MDPI
, 2023 , Article)
The wax leakage from shape-stabilized phase change materials (SSPCMs) is a limitation because it reduces their functionality. In this work, an enhancement of the compositional stability of SSPCMs formed by high-density ...
Purification of emulsified oily polluted waters with modified melamine foams
(
Elsevier
, 2023 , Article)
Oil and gas industry operations produce tremendous amounts of wastewater (produced water; PW). Tertiary treatment of the PW in the final treatment stage is challenging due to the presence of colloids with sizes < 500 nm ...
Foamed phase change materials based on recycled polyethylene/paraffin wax blends
(
MDPI
, 2021 , Article)
Foamed phase-change materials (FPCMs) were prepared using recycled linear low-density polyethylene (LLDPE) blended with 30 wt.% of paraffin wax (PW) and foamed by 1,1′-azobiscarbamide. The protection of pores’ collapse ...
An Adhesion Improvement of Low-Density Polyethylene to Aluminum through Modification with Functionalized Polymers
(
MDPI
, 2023 , Article)
An interfacial adhesion improvement between low-density polyethylene (LDPE) and aluminum (Al) foil is an important challenge in designing multilayered packaging (TetraPak packaging type) due to insufficient inherent adhesion ...
Electrically conductive, transparent polymeric nanocomposites modified by 2D Ti3C2Tx (MXene)
(
MDPI AG
, 2019 , Article)
The electrically conductive, transparent, and flexible self-standing thin nanocomposite films based on copolyamide matrix (coPA:Vestamelt X1010) modified with 2D Ti3C2Tx (MXene) nanosheets were prepared by casting and their ...