Search
Now showing items 951-960 of 1013
Electrochemical corrosion parameters for active and passive reinforcing steel in carbonated and sound concrete
(
John Wiley and Sons Inc
, 2021 , Article)
The electrochemical corrosion parameters, such as corrosion potential, corrosion current density, and the Tafel constants are necessary inputs for the corrosion modeling in reinforced concrete. Literature shows large ...
Submerged versus side-stream osmotic membrane bioreactors using an outer-selective hollow fiber osmotic membrane for desalination
(
Elsevier
, 2021 , Article)
This study investigated the comparative performances, fouling mitigation efficiencies, and operational costs of side-stream and submerged osmotic membrane bioreactors (OMBR) systems using an outer-selective hollow fiber ...
Surface curing effect on reflection response of hardened cementitious mortar samples
(
Elsevier
, 2021 , Article)
Surface curing effect of hardened engineering cementitious mortar (ECM) samples with distinct water-to-binder
ratios (𝑤∕𝑏) is analyzed by recording amplitude of reflection response |𝛤| or conductance term 𝑔 measured
by ...
Enhancing the UV/heat stability of LLDPE irrigation pipes via different stabilizer formulations
(
John Wiley and Sons Inc
, 2021 , Article)
Herein different stabilizer formulations of linear low-density polyethylene (LLDPE) against UV- and heat-initiated degradation are described. The project aims at outdoor applications, such as irrigation piping and profiles, ...
Copper/nickel-decorated olive pit biochar: One pot solid state synthesis for environmental remediation
(
MDPI
, 2021 , Article)
Developing micro- and nanomaterials for environmental pollution remediation is currently a pertinent topic. Among the plethora of strategies, designing supported nanocatalysts for the degradation of pollutants has achieved ...
Feasibility of recycling waste carbon black in cement mortar production: Environmental life cycle assessment and performance evaluation
(
Elsevier
, 2021 , Article)
The feasibility of recycling waste carbon black (WCB) that comes as a byproduct from aluminum industry in cementitious composites production is examined in this research. Experimental work combined with environmental life ...
Electrospun Polysulfone Hybrid Nanocomposite Fibers as Membrane for Separating Oil/Water Emulsion
(
Springer Nature
, 2023 , Article)
Commercial polymer membranes are largely utilized to separate oil/water mixtures; however, membrane fouling, flux decline, and short lifetime often inhibit their high performance. In order to resolve these drawbacks of the ...
Development and characterizations of Ag nanoparticles decorated TiO2-ZrO2 coatings as electrode material for supercapacitors
(
Elsevier
, 2023 , Article)
Supercapacitors are considered as newly developed auxiliary and clean supplies of power and energy for the next generation energy storage devices with significant impact in many fields. In the present investigation, Ag ...
Nonenzymatic electrochemical lactic acid sensor using CuO nanocomposite
(
Elsevier
, 2023 , Article)
The detection of biochemical performance and health parameters using wearable sensors have gained more attention. Lactic acid (LA) sensor was developed using the simple facile method for electrochemical detection in ...
Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process
(
Elsevier Ltd
, 2017 , Article)
In this study, Aluminum matrix composite reinforced with 5, 10 and 15 vol% Al2O3 particles were fabricated using microwave assisted rapid sintering technique followed by hot extrusion. The effect of concentration of Al2O3 ...