Search
Now showing items 1-7 of 7
Electrodeposition of nanocrystalline Ni-Mo alloys from alkaline glycinate solutions
(
Electrochemical Science Group
, 2014 , Article)
The induced electrodeposition of nanocrystalline Ni-Mo alloys was investigated using two different molar ratios of Ni:Mo in sodium glycinate solution at pH 9.3. The chemical nature of the Ni2+ and MoO4 2- in alkaline ...
Microstructure and compressive behavior of Al-Y2O3 nanocomposites prepared by microwave-assisted mechanical alloying
(
MDPI AG
, 2019 , Article)
In this study, Al–Y2O3 nanocomposites were synthesized via mechanical alloying and microwave-assisted sintering. The effect of different levels of yttrium oxide on the microstructural and mechanical properties of the Al–Y2O3 ...
Erosion behavior of API X120 steel: Effect of particle speed and impact angle
(
MDPI AG
, 2018 , Article)
The dry erosion behavior of API-X120 pipeline steel was investigated, under the erosive interaction of aluminum oxide particulates, in a range of speed (43-167 m·s-1) and impact angle (30°-90°). Erosion behavior is ...
Scanning Electron Microscopic Studies of Microwave Sintered Al-SiC Nanocomposites and Their Properties
(
Hindawi Limited
, 2018 , Article)
Al-metal matrix composites (AMMCs) reinforced with diverse volume fraction of SiC nanoparticles were synthesized using microwave sintering process. The effects of the reinforcing SiC particles on physical, microstructure, ...
New electrospun polystyrene/Al2O3 nanocomposite superhydrophobic coatings; Synthesis, characterization, and application
(
MDPI AG
, 2018 , Article)
The effect of electrospinning operational parameters on the morphology, surface roughness, and wettability of different compositions of electrospun polystyrene (PS)-aluminum oxide (Al2O3) nanocomposite coatings was ...
Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
(
Elsevier B.V.
, 2017 , Article)
In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical ...
A comparative study of structural and mechanical properties of Al-Cu composites prepared by vacuum and microwave sintering techniques
(
Elsevier Editora Ltda
, 2018 , Article)
In this paper, the aluminum metal matrix composite reinforced with copper particulates (3, 6 and 9 vol.%) were fabricated by high energy ball milling, followed by vacuum sintering (VS) and microwave sintering techniques ...