Search
Now showing items 1-7 of 7
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
(
Elsevier Ltd
, 2019 , Article)
Dissimilar lap joining of AZ31B Mg alloy to Cu-Ni coated Ti-6Al-4V was carried out by laser welding-brazing method. The effect of Cu and Ni contents on interfacial reaction and joint fracture load were analyzed. For the ...
Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications
(
Elsevier Ltd
, 2018 , Article)
© 2018 Elsevier Ltd and Techna Group S.r.l. In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment ...
Sintering behaviour and properties of manganese-doped alumina
(
Elsevier Ltd
, 2019 , Article)
The effect of manganese (0.1, 0.5 and 1.0 wt%) on the sintering and mechanical properties of alumina was studied. Sintering was carried out by the conventional heating method in a box furnace and in a hybrid multimode ...
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
(
Elsevier Ltd
, 2018 , Article)
In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
(
Elsevier Ltd
, 2018 , Article)
The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
(
Elsevier
, 2019 , Article)
A fiber laser welding-brazing procedure has been developed for joining AZ31B magnesium alloy to Cu-Ni coated Ti-6Al-4V titanium sheet using AZ92D filler wire. The effect of the interlayer arrangements (AZ31B/Ni-Cu/Ti-6Al-4V ...
Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces
(2013 , Article)
This paper describes a computationally aided design process of a thin wall structure subject to dynamic compression in both axial and oblique directions. Several different cross sectional shapes of thin walled structures ...