بحث بسيط
السجلات المعروضة 1 -- 10 من 29
Compatibilizing role of carbon nanotubes in poly(vinyl alcohol)/starch blend
(
WILEY-VCH Verlag GmbH & Co.
, 2015 , Article)
Polymer nanocomposites based on poly(vinyl alcohol)/starch blend and carbon nanotubes (CNT) were prepared by solution mixing, followed by casting. Glycerol was used as a plasticizer and added in the starch dispersion. The ...
A new experimental device and inverse method to characterize thermal properties of composite phase change materials
(
Elsevier BV
, 2015 , Article)
A new experimental device has been developed in order to characterize the phase change material (PCM) thermal properties (thermal conductivity k, sensible and latent heat thermal energy storage, cp and Lf) in the solid ...
Poreless Separator and Electrolyte Additive for Lithium-Sulfur Batteries with High Areal Energy Densities
(
WILEY-VCH Verlag
, 2015 , Article)
Despite the attractive theoretical capacity of sulfur over 1600 mA h g−1, lithium–sulfur (Li–S) batteries suffer from insufficient cycle lives mainly due to fatal polysulfide dissolution. This chronic drawback becomes ...
Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: Effect of compatibilization on thermomechanical properties and thermal stability
(
WILEY-VCH Verlag
, 2015 , Article)
Polyethylene terephthalate (PET) and polypropylene (PP) are incompatible thermoplastics because of differences in chemical structure and polarity, hence their blends possess inferior mechanical and thermal properties. ...
The effect of expanded graphite on the physical properties of conductive EVA/wax phase change blends for thermal energy storage
(
John Wiley & Sons, Ltd.
, 2015 , Article)
A study of the morphology, dynamic mechanical, impact, and tensile properties of ethylene vinyl acetate copolymer (EVA)/expanded graphite (EG) and EVA/wax/EG composites is presented. The composites were prepared by melt ...
Cuprous oxide nanoparticles in epoxy network: Cure reaction, morphology, and thermal stability
(
John Wiley & Sons, Ltd.
, 2015 , Article)
Nanosized cuprous oxide filler particles (nCOP) with octahedral morphology were synthesized through hydrazine reduction method and were used to develop a novel nanocomposites based on epoxy resin. The morphology of epoxy–nCOP ...
Effect of graphene loading on thermomechanical properties of poly(vinyl alcohol)/starch blend
(
Wiley Periodicals, Inc.
, 2015 , Article)
Polymer nanocomposites based on poly(vinyl alcohol) (PVA)/starch blend and graphene were prepared by solution mixing and casting. Glycerol was used as a plasticizer and added in the starch dispersion. The uniform dispersion ...
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler
(
Wiley Periodicals, Inc.
, 2015 , Article)
The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ...
Glycoprofiling as a novel tool in serological assays of systemic sclerosis: A comparative study with three bioanalytical methods
(
Elsevier
, 2015 , Article)
Systemic sclerosis (SSc) is an autoimmune disease seriously affecting patient’s quality of life. The heterogeneity of the disease also means that identification and subsequent validation of biomarkers of the disease is ...
Monolayer polymer photocells. The opportunities
(
Academy of Sciences and Arts of the Republic of Serbia
, 2015 , Article)
The conversion of solar energy into electricity is in the focus of a large number of scientists. Because of the problems caused by the use of fossil fuels, the use of renewable and environmentally friendly energy sources ...